Davis Technologies, Inc. Website Header Image Davis Technologies, Inc. Website Top Frame Image

How Does It Work ?

Spinning the tires not only makes the car harder to drive, but it also causes higher tire temps and excessive tire wear.

Lifting off the throttle or counter steering to correct for this 5% mistake, not only upsets the rhythm, it slows the car down!

Typically, if a driver makes a 5% mistake with the throttle, he/she has to correct 20-25% to fix it.
But if the tire slip is detected within one cylinder worth of crank rotation, as the Davis Technologies systems do, then a small reduction in power can reduce or stop the tire slip.

The Non Self-Learning systems, such as our TMS-750, periodically compare the rate of acceleration of the crankshaft to an Adjustable Fixed Rate (AFR), known as Threshold.

If the Engine RPM rate of change is in excess of that Threshold, then a correction is made; therefore, reducing the slip.

The comparison is made every cylinder (1/4 of a turn of the crank shaft).

Basically, this Patented system looks for spikes in RPM that are caused by wheel slip.  If these spikes are large enough, then a correction is made, reducing the slip.

By adjusting the Threshold, the driver can tune the system to the desired "feel".

Self-Learning systems, such as our TMS-750-SL,
TMS-5500-SL, and TMS-9500-SL series, compare the rate of acceleration of the crankshaft to a calculated threshold value that is constantly updated based on the average of the previous measurements.

This update occurs on every crankshaft revolution. So, if the last 1/4 of a turn of the crankshaft (one cylinder) is faster than the average of the last full revolution (4 cylinders), then a slip is detected.

Through this very advanced Patented process, the system constantly accounts for track conditions, tire condition, even driving style to constantly update the internal settings.

These settings are updated as many as 200 times a second to keep the unit calibrated to exactly the right settings regardless of changing conditions.

Basically, the systems learn the average rate of acceleration of the crankshaft, and if there is a sudden spike in RPM above that rate, then a correction is made.

This allows the system to adjust to the Correct settings even if one corner has more grip than another, or even one groove to another.

The user does have an adjustment referred to as “Mode” that sets the overall sensitivity of the system to make a correction based the extent of the tire slip.  By adjusting the Mode, the driver can tune the system to the desired "feel".

The speed and learning capabilities of our systems is what makes Davis Technologies the best racing traction control on the market today.  Allowing you to focus on chassis set-up, and not be distracted by constantly having to adjust your traction control settings, as with systems that work on a percentage of slip between the front and rear wheels.
Davis Technologies, Inc. Website Bottom Frame Image

YouTube Channel See Us On Facebook

Made In USA
Copyright © 1999-2015 Davis Technologies. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks
of their respective companies or mark holders.
Any components shown are for illustration or instructional purposes only.
Davis Technologies, llc. is not affiliated or endorsed by
any other ignition component manufacture.

MSD® , HVC™ and Pro Mag® are registered trademarks of
Autotronic Controls Corporation. 
RacePak® is a registered trademark of Competition Systems Inc.
FAST™ is a registered trademark of Fuel Air Spark Technology.
Bluetooth™ is a registered trade mark of Bluetooth Special Interest Group.
Holley® is a registered trademark of Holley Performance Products, Inc.

Davis Technologies, Inc. Website Bottom Frame Image